HEAT SHRINK BUTT CONNECTORS

• Adhesive lined butt connector's, used to join two wires together in line.
• Simply enter a wire into each end so they cross in the middle, crimp the central metal section to secure and heat with a hot air gun to shrink tight onto the wires.
• When heated the connector shrinks and the adhesive lining melts and flows around the material being covered giving a permanent weatherproof bond.
• Three sizes available; 
• Red ~ 22 - 16awg / 0.5mm² - 1.5mm² 
• Blue ~ 16 - 14awg / 1.5mm² - 2.5mm²
• Yellow ~ 12 - 10awg / 4mm² - 6mm²
• High quality, cost effective, commercial grade for electrical, electronic, automotive and general industrial markets.
• High strength and resilience.
• Minimum Shrinkage Temperature ~ +70 Degrees C
• Full Recovery Temperature ~ +100 Degrees
• Operating Temperature ~ -55C to +
• Tensile Strength ~ 14Mpa
• Dielectric Strength ~ 20kv/mm
• RoHS Compliant